3.2 m51 Snapshot - Release Notes
These notes contain changes between DEV300_m29 and DEV300_m51. Please have a look for older Release Notes if you need to know former changes (example: http://development.openoffice.org/releases/3.0.m28_snapshot.html).
This release will install as OOo-Dev 3.2.
Sources can be received from SVN by tag DEV300_m51.
Important note:
DEV300_m40 was the last build towards OOo 3.1 from this codeline. The next 3.1 build will be from the OOO310 codeline.DEV300_m41 is the first build that goes on with the unstable trunk. It does not belong to OOo 3.1.
See also the blog article on GullFOSS.
What's new ?
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Allow to turn off lock-file base document file locking. | i100123 |
feature-info: To work properly, the lock-file based document file locking in OOo needs the possibility to create a lock file in the way that it does not replace the existing one and to remove it. Although normally there are possibilities to do it, sometimes this is not the case. Usually, if the system file locking is on, the office can try to avoid creation of the lock file in this cases, since the file is locked by system file locking. And in case somebody would use the office without system file locking the collision would be detected by the new implementation anyway. This solution is taken to let the most probable scenarios work even in those cases. The problem happens when the lock file can be created but can not be removed for any reason. Although in all the known cases it is either a misconfigured network or a bug in system implementation, it looks to make sense to allow the system administrator to turn the OOo lock-file based file locking off. Thus it would allow to workaround the problem without changing the environment. For this reason there is a new configuration entry "/org.openoffice.office.Common/Misc/UseDocumentOOoLockFile" that is set to "true" by default. It should be set to "false" to deactivate the usage of the lock file. The deactivation will not prevent creation of the lock file. The office will just take the ownership over the lock file even if it already exists. It is of course strongly suggested not to turn off system file locking and lock-file based file locking together, since there will be no real locking at all in this case. |
Mikhail.Voytenko@Sun.COM | framework | ||
Applying cell borders to multiple selection | i50019 |
feature-info: Previously it was only possible to apply cell borders to a single rectangular cell range. Now borders can be applied to any selection of cells. A list of rectangular ranges is determined from the selection, and inner/outer borders are applied to each of the ranges. |
niklas.nebel@sun.com | sc |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Rotate data labels | i24203 | Chart Data Labels | The options for data labels have been extended. It is possible now to define a number format for the value and the percentage value and to display both values at the same time. Furthermore one can define a separator for the different parts of the data label. The placement of the labels can be manipulated via a given set of predefined positions. | ingrid.halama@sun.com | speclink | chart |
Asian typography page for chart elements | i92128 | Asian Typography tab page for Chart | A new tab page “Asian Typography” is now available for Title, Legend, Axes and Data Series. It contains an option to enable or disable the spacing between the different types of text. | ingrid.halama@sun.com | speclink | chart |
button form controls: new "Default State" property, applicable to toggle buttons | i100237 | feature-info: Button controls in documents now have an additional property "Default status". It is enabled if and only if the button's "Toggle" property is set to "Yes", and works like the "Default status" property for e.g. check box controls: It controls in which status the button will be when resetting the form to which the button belongs. |
frank.schoenheit@sun.com | dba | ||
database formscan be zoomed | i41930 | feature-info: Database forms can now be zoomed, much like all other documents: You'll find the usual View/Zoom menu item, and the zoom slider in the status bar. (Ctrl+Scroll wheel continues to work, as it already did before.) |
frank.schoenheit@sun.com | dba | ||
form control property browser: added Position, Size, and Anchor | i99056 | feature-info: In the property browser for form controls, you can now also change the position and size of the control, as well as its anchor (in document types where anchoring is supported, e.g. text docs and spreadsheets). This is especially useful when you want to modify the geometry of multiple controls at once, which previously required invocation of a modal dialog for every control, and now can be done by selecting all controls, and simply entering the new value(s) in the property browser. |
frank.schoenheit@sun.com | dba | ||
font name/style/size displayed in form control property browser | i99422 | feature-info: When displaying the properties of a form control in the property browser, the "Font" property will now display the name, the style (regular, bold, italic) and the size of the current control font. (previously the respective field was simply empty, and the font could only be seen when opening the Character Set dialog.) |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Display of hidden cells | i91578 | Plotting of missing or hidden Values | When plotting values in a chart it can happen that some of the values are missing - for example when a cell was left empty or did not contain a valid value. The users now can decide what should be plotted in such cases:a) | ingrid.halama@sun.com | speclink | chart |
Math: "View / Selection" now "View / Formula Elements" | i33387 | feature-info: The menu entry "View / Selection" in Math is now labeled "View / Formula Elements". |
thomas.lange@sun.com | |
formula editor | |
SYLK export handling of embedded semicolons and double quotes; program ID field content changes to CALCOOO32 | i100205 | feature-info: When writing SYLK files, in string data embedded double quotes are not escaped anymore by doubling them, semicolons are now escaped by doubling them. Previous releases had a bug that did it vice versa, doubling quotes but not semicolons. In formula expressions, if the formula contained embedded semicolons, the expression was written as a quoted string, again doubling embedded quotes, but not semicolons. Instead, expressions now are not written as a quoted string, but semicolons escaped by doubling them. In the previous implementation, Calc could not correctly read data exported by/for Excel if the data contained double quotes (data is truncated) or semicolons (read in duplicated), nor could it produce such files correctly. NOTE: The program ID written changes from SCALC3 (ID;PSCALC3) to CALCOOO32 (ID;PCALCOOO32) due to the incompatible file format. Older releases will treat such files as alien data, not reading the formula expressions. The result will be much the same as if a file produced by Excel was read in. The new code is able to read both variants, translating data from the corrupted file format. |
eike.rathke@sun.com | |
sc | |
Sorting with toolbar buttons now includes formats | i13829 | feature-info: When a cell range is sorted using the "Sort Ascending" or "Sort Descending" toolbar button, cell formats are now sorted with the cells. |
niklas.nebel@sun.com | |
sc | |
More filter criteria in "Standard Filter" dialog | i17995 | feature-info: The "Standard Filter" dialog now shows 4 instead of 3 conditions, and has a scroll bar which allows to access up to 8 conditions in total. |
niklas.nebel@sun.com | |
sc | |
Change source range of a DataPilot table | i23658 | feature-info: It's now possible to change the cell range from which a DataPilot table takes its data. |
niklas.nebel@sun.com | |
sc | |
"New Style" buttons in "Conditional Formatting" dialog | i27253 | feature-info: The "Conditional Formatting" dialog now has a button "New Style" next to each style list box. Pressing one of the buttons opens the "Cell Style" dialog for a new style, and if OK is pressed there, selects the new style in the list box. This allows to create a new style without closing the "Conditional Formatting" dialog. |
niklas.nebel@sun.com | |
sc | |
Cell content is selected in validity selection list | i27666 | feature-info: If a cell has validity of type "Cell range" or "List", when the validity selection list drop-down is opened, the existing cell content is now selected in the list. |
niklas.nebel@sun.com | |
sc | |
Transporting newlines in spreadsheet formulas | i35913 | feature-info: Newline characters (0x0A, decimal 10) created with Control+Enter in multiline text cells are now preserved in spreadsheet formulas. Previously the newline character was replaced by a space character. The newline character can be searched for using the SEARCH or [HV]LOOKUP or MATCH functions with the \n regular expression. A newline character can be inserted in a formula using the CHAR(10) function. If the result contains newline characters it is displayed as a multiline cell. The multiline result is exported to file formats capable handling newlines in cell data, such as CSV. |
eike.rathke@sun.com | |
sc | |
AutoFill for cells with numbers at the start and end | i5550 | feature-info: If the starting cell for AutoFill contains a number at the start and the end, and there's no space after the first number, the number at the end is now incremented. This allows easier creation of things like lists of IP addresses (10.0.0.1 is followed by 10.0.0.2). |
niklas.nebel@sun.com | |
sc | |
Easier deselection of sheets if all sheets are selected | i70320 | feature-info: If all sheets in a document are selected, each of the following actions deselects all except the current sheet: - Changing the active sheet - Clicking into the area right of the sheet tabs (if not all sheets are selected, this opens the "Insert Sheet" dialog as before) - The new entry "Deselect All Sheets" in the context menu for the sheet tabs |
niklas.nebel@sun.com | |
sc | |
Copy & Paste of merged cells over other merged cells | i7500 | feature-info: Merged cells can now be pasted from the clipboard onto other merged cells. Instead of an error message, the old cells are unmerged. |
niklas.nebel@sun.com | |
sc | |
Easier deselection of sheets if all sheets are selected | i7921 | feature-info: If all sheets in a document are selected, each of the following actions deselects all except the current sheet: - Changing the active sheet - Clicking into the area right of the sheet tabs (if not all sheets are selected, this opens the "Insert Sheet" dialog as before) - The new entry "Deselect All Sheets" in the context menu for the sheet tabs |
niklas.nebel@sun.com | |
sc | |
Inserting/deleting in the middle of merged cells | i8302 | feature-info: Inserting or deleting cells, columns or rows into/from the middle of merged cells, which previously caused an error message, is now possible. The merged cell range is enlarged/reduced. |
niklas.nebel@sun.com | sc |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Keyboard shortcut configuration dialog now supports "ALT" modifier | i4756 | feature-info: Though the configuration itself was able to handle it all the time, the dialog for configuring keyboard shorcuts never allowed to use the ALT-key. Now ALT as well als SHIFT-ALT, CTRL-ALT, SHIFT-CTRL-ALT modifiers can be used in the dialog. The dialog does not check if a shortcut can be used or if the system already catches it. The easiest way to find out if the shortcut is usable is to use it to navigate to the corresponding entry in the listbox before trying to assign a command to it. |
mathias.bauer@sun.com | |
framework | |
New text field "Page Count" in impress/draw | i14832 | Text fields in impress | Christian Lippka | speclink | presentation |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
SRB FormWizard supports binary field types | i76783 | feature-info: In FormWizard it is now possible to select also the BINARY, VARBINARY, LONGVARBINARY datatypes, which will insert as Pictures. |
Lars.Langhans@sun.com | dba | ||
Shrink Sections in Sun Report Builder | i79423 | feature-info: There exist 3 new items in the toolbar to remove empty space between section ranges and the first or last control. * Top shrink removes the top empty space between section top range and the first top control. * Bottom shrink removes the bottom empty space between the section bottom range and the last bottom control. * Shrink removes free spaces from both directions from top and from bottom. This function could be very helpful if the report will be export as calc sheet. |
Lars.Langhans@sun.com | dba | ||
SRB Grouping Dialog has a new up/down/delete toolbar | i83082 | feature-info: In Report Builder grouping dialog exist a new toolbar which handles the up and down of grouping entries and also a new delete button to remove grouping entries. |
Lars.Langhans@sun.com | dba | ||
multi-line text form controls preserving their selection | i89821 | feature-info: Multi-line text controls in forms now preserve their selection when losing and re-gaining the focus, making text exchange (like multiple cut'n'pastes) somewhat easier this way. |
frank.schoenheit@sun.com | dba | ||
human-readable event bindings in the property browser | i95963 | feature-info: The event bindings in the form/control property browser are now somewhat more human readable, in that a binding formerly displayed as vnd.sun.star.script:Standard.Module1.Main?language=Basic& location=application now is displayed as Standard.Module1.Main (application, Basic) |
frank.schoenheit@sun.com | dba | ||
event assignments in the property browser can be reset with DEL key | i95977 | feature-info: In the form/control property browser, event assignments can be reset using the DEL key. That is, the read-only input field which is to display (but not modify) the event assignment now at least accepts DEL, completely revoking the assignment for the given event. |
frank.schoenheit@sun.com | dba | ||
property browser: mouse-selection-behavior in property combo boxes changed | i96429 | feature-info: In the property browser, for properties displayed using a combo box (so you can enter free text, but select from a pre-defined list of possible options as well), the behavior for mouse selections changed: Formerly, when you selected an entry from the list, you needed to focus another cell somewhere else before the changed value was committed (even though it was already entered into the text field). Now, the property value is committed already when you select the entry from the list, which makes the work flow somewhat smoother in many cases. |
frank.schoenheit@sun.com | dba | ||
SRB controls bound to data source displays it data source name | i96523 | feature-info: In Sun Report Builder all controls bound to a data source displays it's data source name the prefix is like Calc a '=' (equal). |
Lars.Langhans@sun.com | dba | ||
SRB toolbar items has now also menu items | i96782 | feature-info: All current toolbar items for Report Builder are now also available in the menu structure. For clear work, all items which manipulate existing fields can found in the edit menu structure like section shrink or control resizings. New controls which have to insert are stored in the insert menu structure like picture or shapes. |
Lars.Langhans@sun.com | dba | ||
SRB Context menu contains also section shrink items | i96793 | feature-info: The context menu in active section contains a shrink item, which has a sub menu for the new shrink feature. |
Lars.Langhans@sun.com | dba | ||
form control property browser: renamed "Print" to "Printable" | i97355 | feature-info: The property "Print" in the property browser, when invoked for a form control, has been renamed to "Printable". |
frank.schoenheit@sun.com | dba | ||
button control properties: renamed the action-related events | i97356 | feature-info: Form control buttons feature two events which are fired when the button is pressed, one to veto the actual firing, and one to do an actual action associated with the button. Formerly, they were called "Before commencing" and "When initiating", and as such a constant source of confusion, since it was non-obvious which event to use for which purpose. This situation hopefully improved a little bit with renaming the events (in the property browser) to "Approve action" and "Execute action". |
frank.schoenheit@sun.com | dba | ||
SRB ReportWizard supports binary field types | i98557 | feature-info: It is possible to select BINARY, VARBINARY, LONGVARBINARY datatypes in the Report Wizard. This will insert ImageControls instead of formatted fields. The images will be set 4cm high. Pictures will scale down to this size. |
Lars.Langhans@sun.com | dba | ||
Multiplatform shortcuts support | i99296 | Abstract | |
rvojta@openoffice.org | speclink | framework |
Menu items display changed | i42227 | Menus | A style guide for menus in OpenOffice.org. | philipp.lohmann@sun.com | speclink | gsl |
Optionitem "Icons in menus" now listbox with three options | i95318 | feature-info: The Tools/Options->OpenOffice.org/View page now has a listbox for the "Icons in menus" option. The enhancement is implemented in CWS gtkmenuimages. This was a checkbox before and is now a listbox offering three options: 1) Automatic 2) Hide 3) Show |
Joerg.Skottke@Sun.COM | ui | ||
The base line of Wiki Publisher is changed to OOo3.0 | i81373 | feature-info: Unfortunately, it is not possible to install an xslt-transformation filter as a part of extension in OOo2.4. The problem is fixed in OOo3.0, thus the new base line for the new versions of the extension is moved to OOo3.0 As result the users of the OOo2.4 will not be able to install the new version of the extension. |
Mikhail.Voitenko@sun.com | word processing | ||
MediaWiki filter is no more installed as part of OOo installation | i99462 | feature-info: The MediaWiki filter is not installed as part of OOo installation any more. Instead it will be installed as a part of Wiki Publisher extension, since the two implementations are used together and it allows to provide updates for the filter independently from OOo releases. |
Mikhail.Voitenko@sun.com | word processing |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Ctrl+F11 puts the focus into the style ListBox | i81468 | feature-info: The key combination Ctrl+F11 doesn't call the Style Catalog anymore. Now it puts the focus into the style ListBox in the toolbox of text, frames, OLE-objects and pictures. It makes it easier to apply a paragraph or frame style without using a mouse. |
oliver.specht@sun.com | |
word processing |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Extended UNO AWT menu API | i96390 | Current state | |
carsten.driesner@sun.com | speclink | framework |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Locale data for Maltese (Malta) [mt-MT] | i75365 | feature-info: Added locale data for Maltese (Malta) [mt-MT]. The locale is selectable for character attribution and spell-checking, as default locale, default document language and available for number formats and outline numbering. |
eike.rathke@sun.com | L10N | ||
Locale data for Myanmar (Myanmar) [my-MM] | i83349 | feature-info: Added locale data for Myanmar (Myanmar) [my-MM]. The locale is selectable for character attribution and spell-checking, as default locale, default document language and available for number formats and outline numbering. |
eike.rathke@sun.com | L10N | ||
Locale data for Shuswap (Canada) [shs-CA]. | i86084 | feature-info: Added locale data for Shuswap (Canada) [shs-CA]. The locale is selectable for character attribution and spell-checking, as default locale, default document language and available for number formats and outline numbering. |
eike.rathke@sun.com | L10N | ||
Arabic entries in language list box | i90867 | feature-info: Added new Arabic locales to the language list box, selectable for character attribution and spell-checking. Arabic (Chad) [ar-TD] Arabic (Comoros) [ar-KM] Arabic (Djibouti) [ar-DJ] Arabic (Eritrea) [ar-ER] Arabic (Israel) [ar-IL] Arabic (Mauritania) [ar-MR] Arabic (Palestine) [ar-PS] Arabic (Somalia) [ar-SO] Arabic (Sudan) [ar-SD] |
eike.rathke@sun.com | L10N | ||
Arabic entry in language list | i93694 | feature-info: The language table and list box now have an "Arabic" entry (without region/country) that does not correspond to a locale. It is not offered for language attribution et al, but is selectable if an Arabic language pack is installed, instead of the previous "Arabic (Egypt)". |
eike.rathke@sun.com | L10N | ||
Languages classified as RTL | i95794 | feature-info: The following languages are now classified as Right-To-Left, as they are primarily written in Perso-Arabic script: Kashmiri Sindhi |
eike.rathke@sun.com | L10N | ||
Locale data for Tok Pisin (Papua New Guinea) [tpi-PG] | i95852 | feature-info: Added locale data for Tok Pisin (Papua New Guinea) [tpi-PG]. The locale is selectable for character attribution and spell-checking, as default locale, default document language and available for number formats and outline numbering. |
eike.rathke@sun.com | L10N | ||
Classified some languages as CTL | i96840 | feature-info: The following languages are now classified as CTL languages: Bodo Dogri Maithili Dhivehi |
eike.rathke@sun.com | L10N | ||
Positioning of axes and axis labels | i85625 | Axis Positioning | This specification describes the positioning of axes including the positioning of axes labels and interval marks inside the chart. | ingrid.halama@sun.com | speclink | chart |
new: "Text direction" property for form controls | i30631 | R2L-enabled Control Forms | In regions where people uses right-to-left directed text like Arabia or Israel (Hebrew) forms will look strange if they need to use left-to-right layout control forms.This specification will enhance OpenOffice.org 2.0 with control forms that can have both text directions/layout - left-to-right and right-to-left. | frank.schoenheit@sun.com | speclink | dba |
Function Autopilot from inside the SRB | i94535 | feature-info: The Function Autopilot which is used in the spreadsheet can now be used inside the Sun Report Builder. The Autopilot can be started from: - the data field ( formatted field and image control) - the conditional print expression http://wiki.services.openoffice.org/wiki/SUN_Report_Builder/Documentation#Report_Navigator_-.3E_Report_-.3E_Functions_-.3E_Function_-.3E_Properties_of_General_Tab - the formula - the initial value The Autopilot shows all functions which are supported by the report engine. The documentation for the SRB can be found here http://wiki.services.openoffice.org/wiki/SUN_Report_Builder/Documentation The function description can be found here http://wiki.services.openoffice.org/wiki/Base/Reports/Functions |
ocke.janssen@sun.com | dba | ||
Automatic binding of first table when opening a new Report | i96428 | feature-info: When creating a new report in a database, the report will be bound to the first table from the database. Additional the Add Field dialog will open with all available fields. |
ocke.janssen@sun.com | dba | ||
Report output format now also available in the property browser | i96434 | feature-info: The property browser now shows the selected output format for a report on teh data page when it is selected in the SRB. Currently available formats are - Text document - Spreadsheet document |
ocke.janssen@sun.com | dba | ||
Add Field dialog supports sorting and insert toolbar | i96520 | feature-info: The Add Field dialog now has a toolbar above the listbox for the fields. The toolbar allows to sort the fields ascending and descending as well to remove the sort order and restore origin order from the source (table,query). Additional the toolbar contains an "Insert" entry which allows to insert the selected fields into a report section. Multiselection of fields is also supported. |
ocke.janssen@sun.com | dba | ||
Allow anti-aliasing of drawing objects | i28526 | |
|
armin.le.grand@sun.com | speclink | drawing |
Unify DrawObject modification with full attributes | i95646 | Solid Dragging: Adapt Tools/Options/View dialog settings concerning 3D, AntiAliasing and DrawObject Interactions | This Specification describes three single tasks which are so closely related, that i will describe them in a single specification. The following definitions of the three tasks will be used throughout the document: | armin.le.grand@sun.com | speclink | drawing |
Support images in extension help | i83627 | Extensible Help | Target of the extensible help project is to support help content inside OpenOffice.org extensions. The extensions' help content is provided together with the OpenOffice.org installed help content. The help index can be extended by extensions. The implementation supports extended tool tips and accessing extension help content by pressing F1 in UNO dialogs and menus. | Andreas Bregas (ab) | speclink | framework |
File locking implementation changes. | i95809 | File Locking | File locking is needed to control access to a document. If a file/document is locked, nobody else could change/delete the document. A file locking mechanism is offered by the operating system, but in some cases this mechanism does not/could not work. Therefore OOo implements an own mechanism beside the one provided by the operating system. System and OOo file locking are combined. This allows OOo to have a reliable locking also when the locking from the operating systems fails in some cases. Furthermore it allows to OOo see who has already opened the document. | Frank Loehmann (FL) | speclink | framework |
Allow usage of default master password. | i97092 | Electronic Signatures and EncryptionGraphical User Interface (GUI) | |
Mikhail.Voitenko@sun.com | speclink | framework |
Remove unused 3D options | i95644 | Solid Dragging: Adapt Tools/Options/View dialog settings concerning 3D, AntiAliasing and DrawObject Interactions | This Specification describes three single tasks which are so closely related, that i will describe them in a single specification. The following definitions of the three tasks will be used throughout the document: | armin.le.grand@sun.com | speclink | gsl |
Make slideshow media controllable via effects | i91250 | |
|
christian.lippka@sun.com | speclink | presentation |
Sorting improvements | i20491 | feature-info: Sorting has been improved: - Sorting preserves the original order of entries with equal sort keys. - If there are no previous sort settings, the sort dialog defaults to the column of the cursor position. The toolbar buttons always use the cursor position. - The toolbar buttons use the same logic as the sort dialog to determine if a range has column headers. |
niklas.nebel@sun.com | sc | ||
Sorting improvements | i22758 | feature-info: Sorting has been improved: - Sorting preserves the original order of entries with equal sort keys. - If there are no previous sort settings, the sort dialog defaults to the column of the cursor position. The toolbar buttons always use the cursor position. - The toolbar buttons use the same logic as the sort dialog to determine if a range has column headers. |
niklas.nebel@sun.com | sc | ||
INDIRECT now supports the '!' sheet separator | i30172 | feature-info: For MS-Excel interoperability the INDIRECT function now supports the '!' exclamation mark as sheet name separator when interpreting cell address strings, additionally to the '.' dot separator Calc uses. This change aligns with the behavior of other spreadsheet applications and the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula |
eike.rathke@sun.com | sc | ||
Rename sheet with double-click | i4517 | feature-info: Double click on a sheet tab now shows the rename dialog. |
niklas.nebel@sun.com | sc | ||
Repeat vectors if used in 2D array | i46681 | feature-info: A column or row vector is now replicated if used in an array formula such that a 2D matrix is required by an operation but only a vector was given. For example, the formula ={1;2;3} entered as a matrix formula in a range selection of 3 columns by 2 rows results in two rows with values 1 2 3 each. This works also in not so trivial cases, http://qa.openoffice.org/issues/show_bug.cgi?id=46681 mentions a few use cases. This change aligns with the behavior of other spreadsheet applications and the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula |
eike.rathke@sun.com | sc | ||
Sorting improvements | i7277 | feature-info: Sorting has been improved: - Sorting preserves the original order of entries with equal sort keys. - If there are no previous sort settings, the sort dialog defaults to the column of the cursor position. The toolbar buttons always use the cursor position. - The toolbar buttons use the same logic as the sort dialog to determine if a range has column headers. |
niklas.nebel@sun.com | sc | ||
Formula syntax in tip help | i86856 | |
|
niklas.nebel@sun.com | speclink | sc |
Zoom slider in Calc status bar | i88437 | feature-info: The Calc status bar now has a slider for the zoom factor, like Writer (since 3.0) and Draw/Impress (m35). |
niklas.nebel@sun.com | sc | ||
Scaling factor in toolbar for page preview | i88521 | Print Output Scaling Factor | According to the request of the to-do list in O community, the feature is to add resizeable margin on page preview in | Frank Loehmann (FL) | speclink | sc |
Scroll wheel switches pages in page preview | i89145 | feature-info: If an entire page is visible in the page preview, the mouse scroll wheel can now be used to switch to the previous/next page. |
niklas.nebel@sun.com | sc | ||
BETADIST with optional parameter for cumulative/density | i91547 | feature-info: The BETADIST spreadsheet function now has an additional optional 'cumulative' parameter to specify whether to calculate the probability density function or the cumulative distribution function, defaulted to TRUE for compatibility. This change aligns with the behavior of other spreadsheet applications and the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula A new implementation of BETADIST now yields results with a much better precision than in earlier releases. |
eike.rathke@sun.com | sc | ||
Storage of data pulled in by external references changed | i92797 | feature-info: The implementation of how data pulled in by references to external documents in formulas is stored internally was changed. Previously, all data of a referred external sheet was stored in a hidden sheet. Now only the data referred is stored in a separate structure, hidden sheets are not created anymore. This has the advantages that - By not creating hidden sheets the amount of available 255 sheets is not decremented. - It should be possible to refer more than 254 external sheets, given enough memory for the amount of data of course. - Less data needs to be stored when saving the document to file. - No unintended data leakage may occur because data not referred is not saved to files. Note that the external sheets will not show up anymore in the Navigator. For ODF file storage the data is still saved as external sheets, previous versions will be able to read the document. Re-saving an already existing document with the new version may result in a significantly decreased size of the file's storage, depending on the previous amount of data in the entire sheet and the amount of data actually used in formulas. |
eike.rathke@sun.com | sc | ||
Added EUROCONVERT function | i93789 | feature-info: The EUROCONVERT spreadsheet function to convert between former currencies of the Eurozone is implemented, including import from and export (binary) to Excel file formats. This change aligns with the behavior of other spreadsheet applications and the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula |
eike.rathke@sun.com | sc | ||
New GAMMA, CHISQDIST, CHISQINV, changed GAMMADIST. | i94555 | feature-info: Several changes according to ODFF. (1) Introduce the GAMMA function. (2) Introduce CHISQDIST. In contrast to CHIDIST it gives the left tail probability, same as other distributions do. In addition it has an optional parameter to calculate the density function. (3) Introduce CHISQINV. (4) Adapt the "cumulative" parameter of the GAMMADIST function to be optional. If omitted, the default value 1 is stored in ODF documents and export to Excel for compatibility. (5) Adapt the domain of CHIDIST to allow negative x, see ODFF 6.17.10. (6) Remove the constraint "degrees of freedom < 1.0E5" from CHIDIST and CHIINV because they are no longer needed with the new implementation. Unfortunately the identifier GAMMAINV is already used for the inverse of the Gamma-distribution. It can likely be confused to be the inverse of the Gamma function. A comment in the application help is necessary. These changes align with the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula Note: for GAMMADIST and GAMMAINV, the third parameter 'beta' is used in the way that mean=alpha•beta, but ODFF draft spec uses the third parameter 'lambda' in the way that mean=alpha/lambda. This needs to be changed in ODFF spec. The application help must explain, which use of the parameter OOo has, because the common usage of the parameter differs between countries. Note: The domain of the GAMMA function contains negative values. The ODFF draft spec is not adapted yet. |
eike.rathke@sun.com | sc | ||
DATEVALUE and TIMEVALUE now return date or time only | i94765 | feature-info: The DATEVALUE and TIMEVALUE spreadsheet functions now return the numeric value for date repectively time only. In the case of DATEVALUE only the integer part of the date serial is returned, in the case of TIMEVALUE only the fractional part is returned. Previously, both functions returned the combined integer and fractional value. This change aligns with the behavior of other spreadsheet applications and the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula |
eike.rathke@sun.com | sc | ||
Base parameter of LOG now optional | i96835 | feature-info: The 'base' parameter of the LOG spreadsheet function is now optional, defaulted to base 10. The implementation already handled this, but it was not reflected in the UI of the formula wizard. This change aligns with the behavior of other spreadsheet applications and the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula |
eike.rathke@sun.com | sc | ||
Cumulative parameter of POISSON now optional | i96837 | feature-info: The 'cumulative' parameter of the POISSON spreadsheet function is now optional. If omitted, storing the function in ODF files adds the default value for backwards compatibility. Also during export to Excel the parameter is added, as Excel expects all 4 parameters to be present. This change aligns with the definition given in the OASIS ODFF/OpenFormula specification available at http://www.oasis-open.org/committees/documents.php?wg_abbrev=office-formula |
eike.rathke@sun.com | sc | ||
New "Context" mode for numerals setting | i22396 | |
Digits used in Arabic text (“Hindi digits”) are different from digits in Western text (“Arabic digits”). Since some of the IMEs (Input Method Editor) do not deliver the correct Hindi digits but the common Arabic digits, a configuration setting has been implemented for OpenOffice.org 1.2 that allows the user to switch the digits that are shown in the document. This setting used to have three different states: “all digits Hindi”, “all digits Arabic”, and “all digits depending on the system locale”. This feature was lacking a mode that chooses the correct digits based on the context of the digits: Hindi digits in an Arabic context, Arabic digits in any other context. | Frank Meies (FME) | speclink | word processing |
Introduction of an overline font effect | i5991 | Introduction of an overline font effect | Introduce a new font effect that draws a line above a selected character or group of characters. The line style and colour may be selected by the user, with the same options available as for the underline font effect. | frank.loehmann@sun.com | speclink | word processing |
Accept/Reject Change in context menu | i6191 | Accept and Reject Changes | Editing changes (aka redlines) is possible using the dialog “Accept or Reject Changes”. As this is cumbersome it makes sense to add entries to accept or reject to the context menu. | Oliver Specht, os | speclink | word processing |
changes to format menu | i64127 | |
|
mod@openoffice.org | speclink | word processing |
Introduction of an outline level attribute for paragraphs and paragraph styles | i70748 | Introduction of an outline level attribute for paragraphs and paragraph styles | Introduce a new paragraph and paragraph style attribute, named “outline level”, to transform a normal paragraph directly and independently from any certain list style or paragraph style into a heading. | Oliver-Rainer.Wittmann@Sun.COM | speclink | word processing |
More hyperlink related entries in the context menu | i7311 | Edit and Delete Hyperlink | Hyperlinks in Writer documents can be modified with the hyperlink dialog and in the Format/character dialog. It should also be possible to easily remove a hyperlink and to copy the URL of the hyperlink to the clipboard. | Oliver Specht, os | speclink | word processing |
search inside notes | i80135 | |
|
mod@openoffice.org | speclink | word processing |
Serbian Cyrillic Numbering Provider | i86142 | feature-info: Added support for Serbian Cyrillic Numbering Provider in outline numbering. |
eike.rathke@sun.com | |
word processing | |
Inconsistent terms: Autoformat - Autocorrect | i87347 | |
|
mod@openoffice.org | speclink | word processing |
New look for selection: transparency | i88893 | |
|
armin.le.grand@sun.com | speclink | word processing |
"Navigator" added to the view menu | i89315 | |
|
mod@openoffice.org | speclink | word processing |
Grammar checking | i90144 | Spelling and Grammar Checking | Grammar checking is now available in OpenOffice.org Writer. Therefore the former dialog gets extended to handle grammar checking too. The dialog is now also able to show a vendor logo as a bitmap and name in the dialog title. | Frank Loehmann (FL) | speclink | word processing |
reply to existing notes | i93690 | |
|
mod@openoffice.org | speclink | word processing |
changes to Tools-AutoCorrect | i94551 | |
|
mod@openoffice.org | speclink | word processing |
Footnotes... renamed to Footnotes/Endnotes... | i94633 | |
|
mod@openoffice.org | speclink | word processing |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
bi-directional writing for chart elements | i14365 | Bi-directional Writing in Charts | For an Arabic version of OpenOffice.org it is necessary to allow control over the text direction for chart elements that do contain text. | ingrid.halama@sun.com | speclink | chart |
image controls: support for document-embedded images | i38215 | feature-info: Image controls can now be bound to images which are embedded in the document where the control lives in. More precise, when you select an image to be displayed at an image control, the "Link" option in the file picker is not disabled anymore. When you uncheck the option (the default is "checked", to mimic the legacy behavior), then the image is displayed in the control, and upon saving the document, it's embedded in the document itself. This way, you can create documents with image controls which are exchangeable with other people/installations/platforms, which formerly was much more difficult due to the need to also copy the images, and place them in exactly the same location as on the originating machine (which often is simply impossible). Thanks for Noel Power for providing the patch for this. |
frank.schoenheit@sun.com | dba | ||
Relative path for file based databases | i41897 | feature-info: At the moment, when you create a file-based database (such as dBase or Spreadsheet), the URL to the files (let's call it the "data URL") is stored in an absolute manner - that is, something like "file:///c:/foo/bar". As a result, when you move the database document (the .odb file), together with the underlying data, to another machine, you need to either duplicate the file structure on this target machine, or to adjust the settings for the database. Now it is possible that the path is stored relatively when the option "Save URLs relative to file system" setting in the "Tools->Options->Load/Save" dialog is checked. |
ocke.janssen@sun.com | dba | ||
SQL syntax highlighting | i67961 | mod@openoffice.org | speclink | dba | ||
New short cuts for Sun Report Builder | i80200 | feature-info: The Edit menu now contains a "Select All" entry which contains Select All -> Select All Select all Labels Select all Formatted Fields Select Report |
ocke.janssen@sun.com | dba | ||
views opened for editing are automatically put into "Run SQL Directly" mode | i87192 | feature-info: When you open an table view for editing its constituting SQL command (which is a feature currently supported for embedded HSQLDB only), then the query editor is automatically put into the "Run SQL command directly" mode. |
frank.schoenheit@sun.com | dba | ||
"Empty string is NULL" behavior refined | i90403 | feature-info: In the course of fixing issue 90403 and issue 92471, the behavior of form controls whose "Empty string is NULL" property is set to "Yes" has been refined. This change might make existing forms behave slightly different than before, but certainly more expectation-conformant now. First, the property is now also respected when you never touched the respective control before saving the record. That is, imagine a control which has this property set to "Yes", this way declaring that if the control contains an empty string, then this should be propagated to the database as (the dedicated) NULL value. Formerly, when you moved to the insertion row of the form, so the control was initially empty, entered some data into other controls of the current record, and saved the record without actually touching the first control, then it actually updated an empty string. Now, with the change, it updates NULL, as this is what "Empty String is NULL" = "Yes" requests. Second, when a control was bound to a database column which was declared as NOT NULL, then the control *always* updated an empty string instead of NULL, no matter what its "Empty string is NULL" property requested. Effectively, this killed server-side defaults of database fields, as such defaults are only applied when the field is NULL. Now, with the change, controls always update NULL in such a setup, this way enabling server-side defaults. |
frank.schoenheit@sun.com | dba | ||
image controls: can be bound to text database columns, interpreting their content as relative link to the image | i91310 | feature-info: Image controls in database forms can now be bound to text columns. Formerly, you could only bind them to columns whose content could reasonably be interpreted as binary (BLOB etc.). Now, when you select a text database column as source for the image control, then it will interpret the content of the respective column's content as URL, and load and display the image pointed to by this URL. Also, the URL might be relative to the document which the image control is embedded into. |
frank.schoenheit@sun.com | dba | ||
form controls: new property "Input Required" | i92322 | feature-info: All form controls which can be bound to a database column (i.e. have the "Data field" property) now have a new property called "Input required". Description ========= This property controls whether or not the input of this field is checked against being empty (NULL). It is evaluated for controls which are bound to a database field which is defined as required (i.e. which is not allowed to contain the special NULL value), immediately before the current record of the form is to be written into the database. If the property is set to "Yes", and the field contains no input when the current record is to be written to the database, then an error message will be shown to the user, and the respective control will be focused afterwards. Note that this is the known behaviour so far - the property defaults to "Yes" so that newly created controls behave as they would do in previous OOo versions. If the property is set to "No", and the field contains no input when the current record is to be written to the database, then this is ignored. It's up to the underlying database to either reject the update, or fill the respective column with a server-side default value. Functional Constraints ================= If the "Form data input checks for required fields" option in the advanced settings of the database document (Edit / Database / Advanced Settings ...) is *not* checked, then the "Input required" property for all controls in all forms in this database document does not have any effect, since the document-wide setting overrules the per-control settings. UI == In the property browser, the "Input required" is located immediately below the "Empty string is NULL" property, if it is present, otherwise immediately below the "Data field" property. If the "Data field" is not set (i.e. empty), then "Input required" is disabled, since it would be evaluated for bound controls only, anyway. If the "Empty string is NULL" is set to "No", then "Input required" is also disabled, since "Empty string is NULL" being "no" implies that when the user does not enter any value in the control, then an empty string, instead of the dedicated value NULL, is written, so there's always a non-NULL value no matter the user's action. |
frank.schoenheit@sun.com | dba | ||
image controls: scaling the image by keeping the ratio | i93264 | feature-info: Image form controls in documents got an additional mode for scaling the image they display. Previously, you could control the scaling by setting the "Scale" property to "Yes" or "No" only, where "Yes" implied an anisotropic scaling, i.e. one which distorted the image's dimensions. Now, the "Scale" property allows the values "No" (same as before), "Keep Ratio" and "Fit to Size" (equivalent to the old "Yes"). When "Keep Ratio" is selected, the image is still scaled up or down to match the control dimensions, but it's ratio is aspect kept constant. This is especially useful for controls where the designer of the document does not know, at time of designing the document/control, the dimensions of the to-be-displayed images. In particular, this is useful for image controls in database forms, displaying images obtained from the database. |
frank.schoenheit@sun.com | dba | ||
check box grid columns have the "Tristate" property | i93457 | feature-info: Check box columns in grid controls now have the "Tristate" property, which controls whether or not the "indetermined" state is allowed for the check box, as known from ordinary check box form controls. |
frank.schoenheit@sun.com | dba |
Feature title | TaskId | Spec. title | Spec. abstract | Dev. owner | Spec. link | Component |
---|---|---|---|---|---|---|
Let OOo use own file locking mechanics to lock alien formats as well. | i95528 | As practice has shown, it is a quite common case that OOo is used to edit documents of alien formats on network. Unfortunately it looks to be impossible to let the file be locked using file system locking, since it does not work in heterogeneous file systems as expected, and the mentioned scenario has been recognized as very important one. Thus the locking mechanics of OOo is not recognizable for third-party applications, except they implement support for OOo locking mechanics. The implementation in childworkspace fwk94 let the alien files be locked using the OOo file locking mechanics as well. That solves at least the cases when a file of alien format is edited only by OOo3.x in network. | Mikhail.Voitenko@sun.com | |
framew |
Integrated Child Workspaces
List of integrated child workspaces:
Name |
Description |
Milestone (integrated) |
ause102 |
remove solver from PATH |
DEV300m51 |
automation006 |
[Automation] |
DEV300m51 |
calc50 |
Miscellaneous Calc implementation and fixes for 3.2 |
DEV300m51 |
dev300m51masterfix | DEV300m51 | |
fhawfixes1 | DEV300m51 | |
fwk103 |
Framework fixes for OpenOffice.org 3.2 |
DEV300m51 |
hcshared21 |
Application Help issues that are not part of a feature CWS |
DEV300m51 |
impress171 |
Issues for Impress with target OOo 3.2 |
DEV300m51 |
jl126_DEV300 |
Assembly versions must be incremented for EVERY release. |
DEV300m51 |
l10ncleanup04 |
Move translations into own module |
DEV300m51 |
mav54_P1 | DEV300m51 | |
mingwport20 |
mingw port update |
DEV300m51 |
ooo311gsl01_DEV300 |
GSL issues for target OOo311 |
DEV300m51 |
ooo311gsl02_DEV300 |
Fix 3.1.1 issues |
DEV300m51 |
ooo31osol_DEV300 |
Release CWS |
DEV300m51 |
pdfextfix02_DEV300 |
Improvement of pdf import extension |
DEV300m51 |
svp02_DEV300 | DEV300m51 | |
unifypaper01 |
Add a "long bond" paper type in the UI (used in the Philippines) and merge |
DEV300m51 |
ause101 | DEV300m50 | |
automationdev300m48cat3 |
Fixes
for module testautomation for category 3. To be integrated in next |
DEV300m50 |
bserver46 | DEV300m50 | |
c06v7_DEV300 | DEV300m50 | |
calclinkfixes |
Fixes to links/external references in Calc |
DEV300m50 |
calcperf04 |
Calc performance improvements. |
DEV300m50 |
chart37 |
Chart: Rotate Data Labels, Asian Typography and bug fixes |
DEV300m50 |
clnoundo |
This
cws fixes a crash while loading tables that was introduced with the new |
DEV300m50 |
cmcfixes59 |
misc small dev-level fixes |
DEV300m50 |
dba32b | DEV300m50 | |
dev300m50masterfix | DEV300m50 | |
evoab2def |
replace the stone-aged command-line-based SDBC driver for |
DEV300m50 |
extmgr02 |
fix Mac OS X / linux (archive) build problem |
DEV300m50 |
macrofpicker01 |
Fix problem with Aqua filepicker when called from a macro. |
DEV300m50 |
mav52 |
Fixes for Wiki Publisher. |
DEV300m50 |
mla01 |
Bugfixing for OOo 3.x, mostly strings (mla test cws) |
DEV300m50 |
native247 |
OOo 3.2 installation tasks |
DEV300m50 |
os128 |
performance improvements in sw and xmloff |
DEV300m50 |
sysui37 |
rpm packaging / smoketest / insetset fixes |
DEV300m50 |
tkr20 |
OOo 3.2 Bug fixes and patches |
DEV300m50 |
vcl101 |
More 3.2 fixes |
DEV300m50 |
vcl102 |
gsl changes for OOo 3.2 |
DEV300m50 |
ab68 |
xmlhelp related changes / fixes |
DEV300m49 |
automation005 |
[Automation] m47 script fixes |
DEV300m49 |
automation32m47 |
Fixes for testautomation scripts on the way to 3.2 |
DEV300m49 |
cairocanvastext01 |
When cairo canvas is used to render graphics, render also text with cairo canvas |
DEV300m49 |
calc49 |
Ongoing Calc development for 3.2 |
DEV300m49 |
calcmultiline |
Handle multiple lines (newlines) within formula results. |
DEV300m49 |
datapilotrange |
Allow to change the source range of a DataPilot table |
DEV300m49 |
dev300m49masterfix | DEV300m49 | |
dv11 | DEV300m49 | |
impress169 |
ongoing work for impress in OOo 3.2 |
DEV300m49 |
koheichart01 |
Display of hidden cells - Add support for showing/hiding data points in chart by simply |
DEV300m49 |
m48fixshorttrack |
shorttrack CWS (aka master fix) for an annoying issue |
DEV300m49 |
mav51 | DEV300m49 | |
native240 |
Making full packaging process "cygwin ready". |
DEV300m49 |
smoketest22 |
smoketest fixes |
DEV300m49 |
tl66 |
Misc fixes for OOo 3.2 |
DEV300m49 |
cmcfixes58 |
trivial fixes |
DEV300m48 |
dev300m48masterfix | DEV300m48 | |
fwk111_DEV300 |
Possible showstoppers for OOo 3.1. |
DEV300m48 |
impress168 |
Impress 3.2 bugfix workspace |
DEV300m48 |
impress170 |
Bug fixes |
DEV300m48 |
mba32issues01 |
Small bug fixes, patches etc. |
DEV300m48 |
mingwport19 |
mingw port update fix |
DEV300m48 |
os127 |
Bugfixing in sw |
DEV300m48 |
paw06 | DEV300m48 |
ause100 |
small fixes and cleanups |
DEV300m47 |
automation310g_DEV300 |
[Automation] |
DEV300m47 |
automation310m9_DEV300 |
latest fixes for testautomation module |
DEV300m47 |
automation310wg_DEV300 | DEV300m47 | |
aw069 |
BugFixing CWS for #i100710# |
DEV300m47 |
aw070_DEV300 |
BugFixing CWS (mainly #i100851#) |
DEV300m47 |
aw071_DEV300 |
BugFixing CWS (for #i101016#) |
DEV300m47 |
aw072_DEV300 |
BugFixing CWS OOo 3.1 (#i101169#) |
DEV300m47 |
bfshrink02 |
remove latest set of unused methods in binfilter (90+) |
DEV300m47 |
calc31stopper5_DEV300 |
3.1 stopper issue #i101118# |
DEV300m47 |
calcdelrows_DEV300 |
Fix a problem with deleted rows in Calc collaboration |
DEV300m47 |
cli005 |
Cleanup some basic code and minor warning issues. |
DEV300m47 |
cltexteditfix_DEV300 | DEV300m47 | |
cmcfixes57 |
misc build fixes |
DEV300m47 |
cwstestresult02 |
submit test results now also for milestones |
DEV300m47 |
dba31m_DEV300 |
Fix in SRB and some other "minor" issues |
DEV300m47 |
dba32a |
ongoing DBA bug fixing towards OOo 3.2 |
DEV300m47 |
dbaperf1 |
Performance improvements for accessing databases |
DEV300m47 |
dev300m47masterfix | DEV300m47 | |
dr67 |
Fixed and extensions for OOXML import |
DEV300m47 |
fwk110_DEV300 |
Showstopper for OOo 3.1 |
DEV300m47 |
gtkmenuimages |
By default follow the system theme as to whether to display menus images |
DEV300m47 |
hr62 |
PCVSLib is no longer in use for OOo and is now hosted separately: |
DEV300m47 |
layoutdialogs2 |
. |
DEV300m47 |
macshortcuts01 |
Mac OS X shortcut issues. |
DEV300m47 |
mav46 |
MediaWiki Publisher related cws. |
DEV300m47 |
mav50_DEV300 |
OOo3.1 framework showstopper cws. |
DEV300m47 |
mingwport18 |
MinGW port update and enhancement |
DEV300m47 |
native236 |
OOo 3.2 tasks |
DEV300m47 |
native241correct_DEV300 |
remove writer2latex from the installset in a correct way and not half-baked. |
DEV300m47 |
odfp31b_DEV300 | DEV300m47 | |
ooo31gsl10_DEV300 |
Fix some 3.1 showstoppers |
DEV300m47 |
python26 |
upgrade python engine 2.3 -> 2.6 |
DEV300m47 |
rnwinr01_DEV300 |
fix issue i101156 |
DEV300m47 |
sb107 |
misc fixes |
DEV300m47 |
sb109 |
misc fixes |
DEV300m47 |
sdk31fix_DEV300 |
OO.org 3.1 SDK fixes |
DEV300m47 |
sw31bf10_DEV300 |
CWS for OOo 3.1 show stopper fixes |
DEV300m47 |
sw32bf01 |
fixes for serious issues in Writer for OOo 3.2 |
DEV300m47 |
swrefactormarks2 |
code refactoring in Writer to set all the various new features that rely on a reference to a range of text on |
DEV300m47 |
automation003 |
[Automation] |
DEV300m46 |
automation004 |
Fix regression in autotests, oversight from CWS dv10 |
DEV300m46 |
automation31gsl1_DEV300 |
Workaround some focus issues that happen in the testtool context |
DEV300m46 |
aw066_DEV300 |
CWS for AAed 3D chart enhancements |
DEV300m46 |
aw067_DEV300 |
BugFixing CWS for OOo3.1 |
DEV300m46 |
aw068_DEV300 |
CWS for 3.1 BugFixing (Showstopper) |
DEV300m46 |
calc31stopper4_DEV300 |
Yet another Calc 3.1 blocker. |
DEV300m46 |
calcsheetref_DEV300 |
Fix in sheet name references. |
DEV300m46 |
cmcfixes56 |
Warnings and misc porting fixes |
DEV300m46 |
dba31l_DEV300 |
fix issue 100541 |
DEV300m46 |
dev300m46masterfix | DEV300m46 | |
dv10 |
misc bug fixes |
DEV300m46 |
fwk106_DEV300 |
Fixes for performance problems on Mac. |
DEV300m46 |
fwk107_DEV300 |
Fixes broken removeTab() method in tab control service. |
DEV300m46 |
hb21_DEV300 |
Showstopper for 3.1 |
DEV300m46 |
jl119_DEV300 |
Showstopper for 3.1 |
DEV300m46 |
jl124 |
This cws is a replacement for cws jl122 which contained some difficult to |
DEV300m46 |
l10nfix310_DEV300 |
contains a mini officecfg l10n fix for zh-TW. |
DEV300m46 |
mh31_last_DEV300 |
update of thirdpartylicensereadme |
DEV300m46 |
minimizer01 | DEV300m46 | |
native239_DEV300 |
Including new JRE6u13. |
DEV300m46 |
ooo31gsl6_DEV300 |
Complete fix for issue 99567 |
DEV300m46 |
ooo31gsl7_DEV300 |
Fixes for showstoppers in GSL: |
DEV300m46 |
ooo31gsl9_DEV300 |
Fix some mac problems |
DEV300m46 |
sw31bf08_DEV300 |
showstoppers in framework for OOo 3.1 |
DEV300m46 |
tbo05 |
testautomation: Reduce entries in cons.txt for hid.lst generation |
DEV300m46 |
tbo06_DEV300 |
Fix urgent integration problem of known isssue for MacOS X exeption. |
DEV300m46 |
tkr21_DEV300 |
OpenSSL 0.9.8k update |
DEV300m46 |
tl67 | DEV300m46 | |
vcl100 |
3.2 gsl fixes |
DEV300m46 |
vistainstall_DEV300 |
Fix installation on Windows Vista |
DEV300m46 |
automation310d_DEV300 | DEV300m45 | |
automation310e_DEV300 | DEV300m45 | |
automation_gapplication_unify |
[Automation] |
DEV300m45 |
bserver45 | DEV300m45 | |
c26v001 | DEV300m45 | |
cygwin03 |
setsolar support on cygwin |
DEV300m45 |
dba31j_DEV300 |
3.1 bug fixing for DBA |
DEV300m45 |
dba31k_DEV300 |
Show stopper fixing for 3.1 |
DEV300m45 |
dev300m45masterfix | DEV300m45 | |
gh16 |
push hid.lst to database for UserFeedback |
DEV300m45 |
native235_DEV300 |
Prepare Java GUI Installer for Solaris Update |
DEV300m45 |
native238_DEV300 |
English license text into all Solaris packages. |
DEV300m45 |
obo36 |
Misc. fixes |
DEV300m45 |
ooo31gsl5_DEV300 |
Still more issues for 3.1 |
DEV300m45 |
rptfix06_DEV300 |
fix SRB build to a) handle --with-system-apache-commons correctly and b) fix --with-system-*t build to include commons-logging-1.1.1jar/$(COMMONS_LOGGING_JAR) in the MANIFEST.MF |
DEV300m45 |
sw31bf09_DEV300 |
again late fix in Writer for OOo 3.1 |
DEV300m45 |
automation002 |
[Automation] |
DEV300m44 |
automation310b_DEV300 |
[Automation] |
DEV300m44 |
automation310c_DEV300 |
[Automation] |
DEV300m44 |
aw064 |
BugFixing CWS; split from aw063 and migrated tasks which were too many for aw063 |
DEV300m44 |
calc31stopper2_DEV300 |
more show stoppers for OOo 3.1 |
DEV300m44 |
calc31stopper3_DEV300 |
Calc 3.1 blocker issues. |
DEV300m44 |
calc31stopper_DEV300 |
show stoppers for OOo 3.1 |
DEV300m44 |
calcsoli2_DEV300 |
Calc sheet selection problem on Solaris/x86 |
DEV300m44 |
chartranges_DEV300 |
Fix a regression with chart data ranges in Calc |
DEV300m44 |
cl12_DEV300 |
|
DEV300m44 |
cmcfixes53 |
remove some unused code |
DEV300m44 |
cmcfixes55 |
Fix some warnings and low-hanging unused methods |
DEV300m44 |
configure24_DEV300 |
configure fixes |
DEV300m44 |
dev300m44masterfix |
|
DEV300m44 |
fwk105_DEV300 |
more late fixes in Writer for OOo 3.1 |
DEV300m44 |
hb20_DEV300 |
showstoppers for 3.1 |
DEV300m44 |
hr60_DEV300 |
CWS-Tools: miscellaneous fixes. |
DEV300m44 |
localization35 |
Localization for OOo 3.1 |
DEV300m44 |
mav47_DEV300 |
Showstopper fix for suggested name in SaveAs dialog. |
DEV300m44 |
mav48_DEV300 |
Framework showstopper fixes for OOo3.1 |
DEV300m44 |
mhu17 |
Module 'store' bugfixes and performance optimizations |
DEV300m44 |
mingwport17 |
mingw port fix and enhancement |
DEV300m44 |
native231 |
Setting version OOo 3.2 |
DEV300m44 |
native234_DEV300 |
OOo 3.1 installation tasks. |
DEV300m44 |
newbaselineunxlngi |
|
DEV300m44 |
ooo31gsl4_DEV300 |
More 3.1 showstoppers |
DEV300m44 |
oooimprovement3_DEV300 |
Important final fixes for Usage Tracking support |
DEV300m44 |
smoketest21 |
smoketest fixes |
DEV300m44 |
sw31bf05 |
late fixes for OOo 3.1 in Writer |
DEV300m44 |
sw31bf07_DEV300 |
late Writer fixes for OOo 3.1 |
DEV300m44 |
xmergeclean |
Add a final DOM->XML serialization fallback and clean up trivial warnings |
DEV300m44 |
automation310a_DEV300 |
fix automation issue for the OOO 310 release |
DEV300m43 |
aw063 |
BugFixing CWS |
DEV300m43 |
calc48 |
Regression fixes around the Function Wizard |
DEV300m43 |
calcperf03 |
Smash some performance bottle necks. |
DEV300m43 |
chart35 |
Bug fixes for Chart and Calc |
DEV300m43 |
cmcfixes54 |
Warnings/Errors fixes |
DEV300m43 |
cmis01 |
|
DEV300m43 |
dev300m43masterfix |
|
DEV300m43 |
dr66 |
All known cell notes issues, including broken Undo/Redo handling in conjunction with notes |
DEV300m43 |
fwk104_DEV300 |
Showstopper fix for new accelerator configuration. |
DEV300m43 |
gfbcrash |
Fixes an important stability problem |
DEV300m43 |
hb19_DEV300 |
showstoppers for 3.1 (hb17 recreated on OOO310_m1) |
DEV300m43 |
hde02_DEV300 |
Autotest fixes for 3.1 |
DEV300m43 |
hunspell4thesaurus |
Add stemming and morphological generation capabilities to |
DEV300m43 |
impress162 |
Slideshow and canvas related bug fixes. |
DEV300m43 |
jl117_DEV300 |
Showstopper CWS |
DEV300m43 |
koheiformula02 |
Further refactoring of Calc code in preparation for variable formula syntax |
DEV300m43 |
movepsprint |
Move psprint code into vcl |
DEV300m43 |
native222 |
Creating new packaging process for signing Windows installation sets |
DEV300m43 |
native223 |
Package Pool for Unixes |
DEV300m43 |
native224 |
Spellchecker into language packs. |
DEV300m43 |
native226_DEV300 |
OOo 3.1 packaging issues. |
DEV300m43 |
native227_DEV300 |
OOo 3.1 packaging and installation tasks |
DEV300m43 |
native228 |
OOo 3.2 packaging and installation tasks. |
DEV300m43 |
native230 |
Enable rpm builds for Linux without LD_LIBRARY_PATH. |
DEV300m43 |
odfp31 |
|
DEV300m43 |
ooo31gsl1 |
3.1 showstopper fixes |
DEV300m43 |
ooo31gsl2_DEV300 |
More 3.1 showstoppers |
DEV300m43 |
ooo31gsl3_DEV300 |
3.1 showstoppers in gsl |
DEV300m43 |
os129_DEV300 |
OOo 3.1 show stopper |
DEV300m43 |
os2port05 |
CWS for tracking the build of DEV300 under OS/2 |
DEV300m43 |
rptfix04 |
Bugfixing for the SRB libformula and other Pentaho libraries |
DEV300m43 |
sw31a11y01 |
bug fixes/changes for accessibility issues for OOo 3.1 |
DEV300m43 |
tkr18 |
OOo 3.1 (UCB) fixes |
DEV300m43 |
tkr19_DEV300 |
3.1 showstopper fix |
DEV300m43 |
ab61 |
3.1 fixes |
DEV300m42 |
ab66 |
xmlhelp related fixes |
DEV300m42 |
aquafilepicker03 |
To fix some minor glitches with the aqua native file picker |
DEV300m42 |
ause099 |
build related fixes, not product relevant |
DEV300m42 |
aw062 |
BugFixing CWS |
DEV300m42 |
configure23 |
more configure fixes |
DEV300m42 |
cwstestresult |
Provide cwstestresult perl script |
DEV300m42 |
dba31g |
ongoing DBA bug fixing towards OOo 3.1 |
DEV300m42 |
dba31h |
ongoing DBA bugfixing towards 3.1 |
DEV300m42 |
dba31i |
Last 3.1 bug fixes for dba |
DEV300m42 |
dev300m42masterfix |
|
DEV300m42 |
dv07 |
Misc. bug fixes |
DEV300m42 |
extras310 |
Bugfixes regarding the Extras for OOo 3.1/SO9.1. |
DEV300m42 |
fwk100 |
framework and toolkit fixes |
DEV300m42 |
fwk101 |
Fixes for 3.1. |
DEV300m42 |
fwk102 |
Framework fixes for OOo 3.1 |
DEV300m42 |
fwk99 |
Bugfixes for 3.1 |
DEV300m42 |
hb14 |
DOCX bugs |
DEV300m42 |
hb16 |
. |
DEV300m42 |
hde01 |
Bugfixes in testautomation |
DEV300m42 |
hr59_DEV300 |
Fix cross master workspace fetch and rebase problems. |
DEV300m42 |
i18n49 |
. |
DEV300m42 |
ichitaroext |
|
DEV300m42 |
impress166 |
OOo 3.1 Draw/Impress Bugfix Workspace |
DEV300m42 |
impress167 |
Bugfix workspace |
DEV300m42 |
impresshtmlex01 |
some small changes for html export API in impress |
DEV300m42 |
jl115 |
3.1 fixes |
DEV300m42 |
jsc314 |
SDK 3.1 fixes. |
DEV300m42 |
jsc315 |
Fix TabControl |
DEV300m42 |
kashidafix02 |
More fun with complex text layout |
DEV300m42 |
macmiscfixes |
Misc mac OS X fixes |
DEV300m42 |
macmozxmlsec31 |
3.1 version of CWS macmozxmlsec |
DEV300m42 |
macwebdav |
check for locking support in SAL when a webdav volume is mounted with Finder. |
DEV300m42 |
mav44 |
Framework bugfixed for OOo3.1 |
DEV300m42 |
mba31issues01 |
. |
DEV300m42 |
mysql1 |
Enable the generic sdbcx mysql driver to handle the native mysqlc driver. |
DEV300m42 |
native218 |
OOo 3.1 installation tasks. |
DEV300m42 |
native220 |
Changing from OOo 3.0 to OOo 3.1 once more. |
DEV300m42 |
notes8 |
notes bugfixing for 3.1 |
DEV300m42 |
npower11 |
porting api implememtations from ooo-build, change of namespace of vba api |
DEV300m42 |
oooimprovement2 |
adding regular Usage Tracking support into product |
DEV300m42 |
pdfextfix |
Fix some pdf import extension issues |
DEV300m42 |
qascripts05 |
Misc fixes in test scripts. |
DEV300m42 |
sb103 |
misc fixes |
DEV300m42 |
sb104 |
get rid of LD_LIBRARY_PATH in build environment |
DEV300m42 |
sb105 |
late 3.1 fixes |
DEV300m42 |
sb106 |
Broken NTLM authentication |
DEV300m42 |
socs23 |
|
DEV300m42 |
soreadme91 |
last Minute Readme edits |
DEV300m42 |
sw31bf02 |
Writer fixes for OOo3.1 |
DEV300m42 |
sw31bf04 |
bugfixes in Writer for OOo 3.1 |
DEV300m42 |
swftnnumbers02 |
fix for issue 98418 - hindi numerals for footnote numbering in arabic and farsi |
DEV300m42 |
tbe35 |
OOo 3.1 Calc bug fixes |
DEV300m42 |
tbe36 |
OOo 3.1 Calc data changes |
DEV300m42 |
tbo04 |
- Evaluate source version information |
DEV300m42 |
tkr16 |
UCB Issues |
DEV300m42 |
transogl03redux |
Integrate ogltrans opengl slide transitions contributions and make buildable and installable as optional component |
DEV300m42 |
vcl98 |
Bugfixes for 3.1 |
DEV300m42 |
vcl99 |
Fix important 3.1 issues (e.g. RTL specific) |
DEV300m42 |
cmcfixes52 |
Remove some trivial warnings |
DEV300m41 |
cwscheckapi7 |
update knownissue lists for automated UnoAPI-Tests |
DEV300m41 |
cygwin02 |
|
DEV300m41 |
dev300m41masterfix |
|
DEV300m41 |
metropatch01_DEV300 |
|
DEV300m41 |
rt37 |
Build fixes for OOo 3.1 |
DEV300m41 |
appleremote02 |
This cws aims to improve appleremote01replacing |
DEV300m40 |
aw061 |
BugFixing CWS fuer 3.1 |
DEV300m40 |
cloph12 |
minor changes to makefiles (to cleanup & reduce false errors in buildlogs) |
DEV300m40 |
configuretoplevel |
move configure etc. to toplevel and other configure related fixes |
DEV300m40 |
dev300m40masterfix |
|
DEV300m40 |
fixgengal_DEV300 |
fix gengal for the 3-layer OOo |
DEV300m40 |
fwk95 |
Framework fixes for OOo 3.1 |
DEV300m40 |
hb15 |
Crashes/Loops |
DEV300m40 |
hro41_DEV300 |
Make the shell script the entry point every unix platform except MacOsX |
DEV300m40 |
jl111 |
3.1 fixes |
DEV300m40 |
kohei02 |
General calc fixes. |
DEV300m40 |
m14scriptfix_DEV300 |
Fixes for oversights during code review of iniinfo.inc. |
DEV300m40 |
mingwport16 |
mingw port catchup and enhance |
DEV300m40 |
native214 |
OOo 3.1 installation tasks. |
DEV300m40 |
native217_DEV300 |
OOo 3.0.1 / SO 9.0.1 installation tasks. |
DEV300m40 |
obo35_DEV300 |
Fix for i97011 |
DEV300m40 |
ooo301gsl4_DEV300 |
fix issue 97710 |
DEV300m40 |
os124 |
Bugfixing OOo 3.1 |
DEV300m40 |
rtlchart03 |
RTL Issues in Charts |
DEV300m40 |
selinux01 |
As per http://people.redhat.com/drepper/selinux-mem.html |
DEV300m40 |
sjfixes10 |
OOo 3.1 bugfix workspace |
DEV300m40 |
sw31bf03 |
bug fixes in Writer for OOo 3.1 |
DEV300m40 |
tl64_DEV300 |
Late grammarcheck fixes. |
DEV300m40 |
aw059 |
UI and InterAction (IA) changes for DrawingLayer for 3.1 |
DEV300m39 |
dev300m39masterfix |
|
DEV300m39 |
dv05 |
Bugfixes for online update / extension manager |
DEV300m39 |
frmdlg |
Extract of the formula editor from calc into a new module formula. |
DEV300m39 |
fwk98 |
Bugfixes for 3.1 |
DEV300m39 |
hr58 |
Changes needed for compiling OpenOffice.org with SunStudio12 on Solaris 10. |
DEV300m39 |
iconupdate310 |
Icon-Bugfixes for OOo 3.1 |
DEV300m39 |
impress147 |
Misc Impress improvements |
DEV300m39 |
kashidafix |
Fixes various Arabic related issues. |
DEV300m39 |
libmsword |
Separate the doc and rtf import/export filters out of the (large) libsw; |
DEV300m39 |
locales31 |
New locales and locale data for OOo3.1 |
DEV300m39 |
macmenusquit |
This cws aims to remove the useless Quit, About and Options entries in the menus, |
DEV300m39 |
mav43 |
New file locking implementation. |
DEV300m39 |
menuchanges |
some main menu changes to improve uniformity |
DEV300m39 |
mozbootstrapfix |
fix mozbootstrap |
DEV300m39 |
native216 |
Adding new bundled extension to OOo 3.1 |
DEV300m39 |
notes7 |
writer notes implementation and fixes for 3.1 |
DEV300m39 |
odff05 |
Implementation of new spreadsheet functions and behavior for ODFF compliance. |
DEV300m39 |
ooxml02 |
Implementation of Open Packaging Convention (OPC) export, |
DEV300m39 |
os123 |
Bugfixing OOo 3.1 |
DEV300m39 |
os126 |
Remove German resources related to grammar checking |
DEV300m39 |
outlinelevel |
Introduce a new paragraph and paragraph style attribute, named “outline level”, to transform a normal paragraph directly and independently from any certain list style or paragraph style into a heading. |
DEV300m39 |
overline3 |
Implementation of overline |
DEV300m39 |
qadev37 |
transform cwstouched from python to perl; small bug fixes. |
DEV300m39 |
rt36 |
Fix for writer2latex extension plus minor build related tasks. |
DEV300m39 |
sb102 |
misc fixes |
DEV300m39 |
vcl97 |
assorted 3.1 fixes |
DEV300m39 |
ab65 |
Support full text search in extension help |
DEV300m38 |
alf01 |
|
DEV300m38 |
betterautoifacedoc |
change to autodoc to display old-style services more clearly |
DEV300m38 |
c24v001_DEV300 |
|
DEV300m38 |
calc47 |
General Calc implementation and fixes for OOo3.1 |
DEV300m38 |
canvas06 |
More work on canvas |
DEV300m38 |
cmcfixes51 |
Remove low-hanging new gcc warnings |
DEV300m38 |
configitems02_svn |
Replace removed CWS configitems01. |
DEV300m38 |
cwscheckapi5_DEV300 |
update knownissues lists in some qa/unoapi |
DEV300m38 |
cwscheckapi6 |
bugfix in solenv/bin/cwstouched.py |
DEV300m38 |
dba301b_DEV300 |
last minute DBA bug fixing for 3.1 |
DEV300m38 |
dba31d |
bugs |
DEV300m38 |
dba31f |
Further bugfixing |
DEV300m38 |
dev300m38masterfix |
|
DEV300m38 |
fha3fixes |
|
DEV300m38 |
fwk92 |
Framework fixes for OOo3.1 |
DEV300m38 |
gcc44 |
gcc 4.4 fixes |
DEV300m38 |
hb12 |
|
DEV300m38 |
hr57 |
Misc. fixes to CWS tools. |
DEV300m38 |
hrovista3_DEV300 |
Fixes for Vista File Dialogs in OOo 3.01 |
DEV300m38 |
i96529_DEV300 |
Fix address reference regression i96529. |
DEV300m38 |
impressfontsize |
implement font grow and shrink toolbar buttons in impress |
DEV300m38 |
jsc312 |
|
DEV300m38 |
jw5 |
Tweaking ports configurations to build with OpenJDK |
DEV300m38 |
macrestart2_DEV300 |
Remove soffice loader and force soffice binary to fork itself for restarting after a crash |
DEV300m38 |
mav45_DEV300 |
Fix for a problem with basic script loss in case of network outage. |
DEV300m38 |
mooxlsc |
Make the Calc formula compiler support some extra bits in the MOOXML Excel import. |
DEV300m38 |
native209_DEV300 |
OOo 3.0.1 installation tasks |
DEV300m38 |
native210_DEV300 |
ooo 3.0.1 installation tasks |
DEV300m38 |
native211_DEV300 |
Updating JRE version and keeping possibility of MinorUpgrade |
DEV300m38 |
odfp30_DEV300 |
|
DEV300m38 |
ooo301gsl2_DEV300 |
More urgent GSL fixes for OOo301 |
DEV300m38 |
ooo301gsl3_DEV300 |
Fix some issues with respect to grammar checking (see also CWS tl56) |
DEV300m38 |
os121 |
Bugfixing OOo 3.1 |
DEV300m38 |
os2port04 |
CWS for tracking the build of DEV300 under OS/2 |
DEV300m38 |
qadev34t_DEV300 |
Remove all cppunit sources, insert a tarball and patch. |
DEV300m38 |
qascripts04 |
Catch-all CWS for QA Automation Issues that are not directly related to any other CWS (such as performance tuning, known issues etc.) |
DEV300m38 |
rt35 |
Fix for deliver (avoid collision when zipping), minor cleanup |
DEV300m38 |
rtlchart02 |
Axis Positioning in Charts |
DEV300m38 |
rtlcontrols |
RTL Controls |
DEV300m38 |
sb101 |
PyUNO regressions |
DEV300m38 |
sjfixes11_DEV300 |
|
DEV300m38 |
sjfixes12_DEV300 |
OOo 3.01 bugfix workspace |
DEV300m38 |
sw301bf04_DEV300 |
late fixes in Writer for OOo 3.0.1 |
DEV300m38 |
sw301bf05_DEV300 |
writer bugfixes for ooo 3.0.1 |
DEV300m38 |
swffixes02_DEV300 |
Build-fix for system-mozilla and 64bit fixes after swffixes got embedding mozilla plugins working again |
DEV300m38 |
sysui28_DEV300 |
Update Hungarian dictionaries |
DEV300m38 |
sysui36 |
sysui 3.1 task |
DEV300m38 |
tl56_DEV300 |
Ongoing implementation of grammar checking framework. |
DEV300m38 |
writer2latexexternal |
make writer2latex be built as an (external) extension, because that's what it is. |
DEV300m38 |
mav42_DEV300 |
3.0.1 showstopper issue. |
DEV300m37 |
ooo301gsl1_DEV300 |
GSL issues for OOo 3.0.1 |
DEV300m37 |
so9nevada_DEV300 |
Integrate SO9 in Nevada |
DEV300m37 |
sw301bf03_DEV300 |
Writer (regression) fixes for SO9.0.1/OOo3.0.1 |
DEV300m37 |
httpperf_DEV300 |
Fix unneeded HTTP requests during product online update notification process. |
DEV300m37 |
dev300m37masterfix |
|
DEV300m37 |
qascripts03 |
[Automation] |
DEV300m37 |
cairosource01 |
Support for building Cairo sources in OpenOffice.org |
DEV300m37 |
jl105 |
3.1 fixes |
DEV300m37 |
koheidatapilot02 |
General bug fixes for Calc's DataPilot. |
DEV300m37 |
sqlsyntaxhighlighting |
SQL syntax highlighting for base |
DEV300m37 |
vcl96 |
Fix gsl tasks for 3.1 |
DEV300m37 |
dba31e |
Further dba issue fixing |
DEV300m37 |
socs21 |
|
DEV300m37 |
accelerators01svn |
move accelerators configuration from "internal XML" to public XCS/XCU based |
DEV300m37 |
qadev34 |
enhancements and bugfixes for qadevOOo |
DEV300m37 |
tbo03 |
trivial testscript fixes in framework/global/math |
DEV300m37 |
hcshared19 |
Help CWS for 3.1 |
DEV300m37 |
rtlchart01 |
bi-directional writing for charts |
DEV300m37 |
ab64_DEV300 |
3.0.1 fixes |
DEV300m36 |
aw058 |
BugFixing CWS for DEV300 |
DEV300m36 |
buildid301_DEV300 |
CWS for issue i94693. |
DEV300m36 |
calc46_DEV300 |
OOo 3.0.1 Calc bug fixes |
DEV300m36 |
cli004 |
OOo build fixes. |
DEV300m36 |
cmcfixes50 |
Misc fixes for warnings seen with new gcc. |
DEV300m36 |
consolar01 |
Removes obsolet switches and parameter from the solenv/config/dev300.ini file. |
DEV300m36 |
dba301a_DEV300 |
Bugfixes for 3.0.1 |
DEV300m36 |
dev300m36masterfix |
|
DEV300m36 |
dv06_DEV300 |
Extension manager should use version info from basis layer |
DEV300m36 |
extmgrui06 |
Bugfixes for extension manager |
DEV300m36 |
fix30autorecovery_DEV300 |
fix issue 92968 (autorecovery does not recover the previously |
DEV300m36 |
fwk94_DEV300 |
Framework fixes for OOo3.0.1 |
DEV300m36 |
hb11 |
|
DEV300m36 |
hr56 |
CWS-Tooling: add 'common' and 'common.pro' as platforms to be fetched; implement 'cws cdiff'; bug fixes |
DEV300m36 |
i18n48_DEV300 |
|
DEV300m36 |
iconupdate301 |
Bugfixes for the Galaxy Icon Set. |
DEV300m36 |
impress163_DEV300 |
impress fixes for OOo 3.0.1 |
DEV300m36 |
jl114_DEV300 |
CLI UNO Fixes |
DEV300m36 |
native206_DEV300 |
|
DEV300m36 |
native207_DEV300 |
OOo 3.0.1 installation tasks |
DEV300m36 |
obo37_DEV300 |
Fix for i95313 |
DEV300m36 |
onlineupdate7_DEV300 |
Allow OpenOffice.org 3.0.1 to recognize itself as 3.0.1 instead of 3.0.0 |
DEV300m36 |
oooimprovementcorefixes_DEV300 |
The OpenOffice.org Usage Feedback Extension is an extension that collects anonymously data |
DEV300m36 |
os122_DEV300 |
bugfixing OOo 3.0.1 |
DEV300m36 |
qascripts02 |
All automated tests currently load the UI filters which creates some overhead. |
DEV300m36 |
rt34 |
Misc. build related fixes. No influence on Office application. |
DEV300m36 |
sw301bf02_DEV300 |
fixes in Writer for OOo 3.0.1 |
DEV300m36 |
swffixes_DEV300 |
Make SWF plugin work again on various platforms |
DEV300m36 |
sysui27_DEV300 |
Fix a trivial sysui solaris issue |
DEV300m36 |
tbo301_DEV300 |
Important changes for update notification behaviour and recognition of patched version number. |
DEV300m36 |
wae4extensions02 |
make extensions warning-free on Windows, again |
DEV300m36 |
appleremote01 |
First part of Apple Remote implementation |
DEV300m35 |
basebmpunittestfix |
Fixes/Adds compiler flags that prevent the basebmp unit tests from failing on |
DEV300m35 |
bmpsum1 |
|
DEV300m35 |
cli002 |
Various patches to remove -Werror warnings with gcc 4.2.3 compilers. |
DEV300m35 |
cli003 |
Removes obsolete .cvsignore files. |
DEV300m35 |
dev300m35masterfix |
|
DEV300m35 |
hr55 |
CWS-Tools: fixes to 'cws rebase'. |
DEV300m35 |
i18n42 |
upgrade icu to 4.0. |
DEV300m35 |
impresszoom |
adding the zoom slide control to impress/draw status bar |
DEV300m35 |
native201_DEV300 |
OOo 3.0.1 installation tasks. |
DEV300m35 |
os120 |
Bugfixing OOo 3.1 |
DEV300m35 |
pflin10 |
Fix some issues about basic runtime function. |
DEV300m35 |
qadocinfo |
Exclude Document Properties TabPage "Custom Properties" from automated testing |
DEV300m35 |
sb97 |
missing .dll.manifest files for some external modules (wntmsci12 only) |
DEV300m35 |
sb99 |
configmgr |
DEV300m35 |
svnignoreoutpaths |
add the common output paths (unxlngi6/.pro, wntmsci12/.pro, |
DEV300m35 |
vcl95 |
more gsl stuff for 3.1 |
DEV300m35 |
ause098 |
build fixes |
DEV300m34 |
aw057 |
BugFixing after aw033 |
DEV300m34 |
cli001 |
Removes corrupt xcf.bz2 files. These files have been checked-in without |
DEV300m34 |
cmcfixes49 |
minor build fixes, primarily to remove gcc 3.4.1 warnings |
DEV300m34 |
dev300m34masterfix |
|
DEV300m34 |
greenstate30_DEV300 |
Autotestfixes to get green state for OOo3.0 |
DEV300m34 |
hr54 |
Implement "cws fetch" command. |
DEV300m34 |
jsktestimprovements1 |
Continue rework of the global file-I/O and filter functions within the testautomation module |
DEV300m34 |
mba30fixes02 |
Done automation, the test results are as expected - a lot of errors and warnlogs which are present on the MWS as well. |
DEV300m34 |
native197_DEV300 |
Patch Preparations |
DEV300m34 |
odbmacros3 |
ongoing implementations to allow macros in database documents |
DEV300m34 |
rt32 |
Hamburg RE tasks around finishing a milestone build |
DEV300m34 |
rt33 |
Fix for #139524# (build prerequisites fo HH environment) |
DEV300m34 |
svnl10nmerge |
|
DEV300m34 |
unowinregfix_DEV300 |
used to fix unowinreg.dll problem with an implicitly but not necessary depdendency to |
DEV300m34 |
ab63_DEV300 |
Fix shopstopper issue i92940 |
DEV300m33 |
addentitlement_DEV300 |
|
DEV300m33 |
chart30 |
Chart issues for OOo 3.1 |
DEV300m33 |
cloph11 |
remove antiquated macosx build-defines |
DEV300m33 |
dba31b |
|
DEV300m33 |
dev300m33masterfix |
|
DEV300m33 |
docmacroassignments_DEV300 |
fix the problem that in various places, browsing for a macro/script |
DEV300m33 |
dr63 |
Calc 3.1 fixes |
DEV300m33 |
fpicker8 |
Fixes for the gtk file picker for transient windows |
DEV300m33 |
hr53 |
Fixes to CWS tooling regarding the switch to SVN. |
DEV300m33 |
hro38_DEV300 |
Preset filename in Vista File Dialog |
DEV300m33 |
i18n45 |
i18n bug fixes. |
DEV300m33 |
i93386_DEV300 |
Improve the behaviour on systems with older libfontconfig (older means <2.4) |
DEV300m33 |
i93512_DEV300 |
Prevent a deadlock on the OSX Aqua port |
DEV300m33 |
i93555_DEV300 |
Fix issue 93555 to display some "Arabic" instead of "Unknown" for an 'ar' Arabic language pack. |
DEV300m33 |
impress149 |
OOo 3.1 Bugfix workspace |
DEV300m33 |
impress157_DEV300 |
fix in the pdfimport extension to enable it to load hybrid pdf in OOO300m4 and newer. This cws only changes the pdf extension and not the office. The fixed extension will also work in prior versions. |
DEV300m33 |
impress158_DEV300 |
OOo 3.0 bugfix workspace |
DEV300m33 |
impress159_DEV300 |
possible showstopper for impress |
DEV300m33 |
impress160_DEV300 |
showstopper fix for impress |
DEV300m33 |
indentfix_DEV300 |
cws for i93873 |
DEV300m33 |
jl112_DEV300 |
showstopper |
DEV300m33 |
jsc311 |
|
DEV300m33 |
koheicoderemoval |
removal of unused methods from sc module. |
DEV300m33 |
localization32_DEV300 |
L10N showstoppers |
DEV300m33 |
localization33_DEV300 |
Missing Spanish hc2 index files |
DEV300m33 |
localization34_DEV300 |
fix one greek string in officecfg |
DEV300m33 |
mav39_DEV300 |
3.0 show stopper fix for activated embedded objects in writer. |
DEV300m33 |
mav40_DEV300 |
Showstopper fix for autosave problem. |
DEV300m33 |
mingwport15 |
MinGW port catchup fix |
DEV300m33 |
native194 |
Preparing OOo 3.1 / SO 9.1 |
DEV300m33 |
native195_DEV300 |
userland rpm into subdir in Linux installation sets with Java GUI Installer. |
DEV300m33 |
native196_DEV300 |
OOo 3.0 installation tasks |
DEV300m33 |
native199_DEV300 |
Mac fix for English system language. |
DEV300m33 |
native200_DEV300 |
OOo 3.0 installation tasks, only mac changes |
DEV300m33 |
os117 |
Bugfixing OOo 3.1 |
DEV300m33 |
qadev33 |
bugfixes and enhancements in qadevOOo |
DEV300m33 |
qaerrorlogfixes1_DEV300 |
[Automation] |
DEV300m33 |
rt31_DEV300 |
Hamburg RE process related only: |
DEV300m33 |
sb93 |
misc fixes |
DEV300m33 |
sb96_DEV300 |
msvcr71.dll missing under Windows MSVC 2003 |
DEV300m33 |
sb98_DEV300 |
libxml2.dll from Windows system dir vs. OOo URE layer (Windows only) |
DEV300m33 |
sfxnotifyremoval |
Removal of SFX_NOTIFY preprocessor macro and all of its references. |
DEV300m33 |
sjfixes06_DEV300 |
|
DEV300m33 |
sjfixes09_DEV300 |
|
DEV300m33 |
sw30bf15_DEV300 |
fix for issue i93725 in Writer and for issue i90961 in desktop |
DEV300m33 |
swlists02 |
import text:numbered-paragraph |
DEV300m33 |
sysui31_DEV300 |
sysui cleanup |
DEV300m33 |
sysui32_DEV300 |
sysui OOo build fix for solaris |
DEV300m33 |
tkr15 |
|
DEV300m33 |
tl62_DEV300 |
Fix for a grammar checker related crash. |
DEV300m33 |
vcl92 |
3.1 issues |
DEV300m33 |
vcl94 |
GSL stuff for OOo3.1 |
DEV300m33 |
hr43 |
|
DEV300m32 |
ab58_DEV300 |
cws to fix showstopper i92555 |
DEV300m31 |
ab60_DEV300 |
cws to fix showstopper i92867 |
DEV300m31 |
ab62_DEV300 |
cws to fix showstopper i93163 |
DEV300m31 |
c17v004_DEV300 |
|
DEV300m31 |
chart31_DEV300 |
chart&calc 3.0 showstopper |
DEV300m31 |
cwsqueryenhance3 |
change cwsquery to always |
DEV300m31 |
dba30i_DEV300 |
Fix in report designer |
DEV300m31 |
dba30j_DEV300 |
3.0 show stoppers in DBA an elsewhere ... |
DEV300m31 |
dbadoccloselock |
fix a deadlock in Base which (currently) is triggered by the new |
DEV300m31 |
dev300m31masterfix |
|
DEV300m31 |
fwk96_DEV300 |
Framework fixes for OOo3.0 showstoppers. |
DEV300m31 |
fwk97_DEV300 |
framework ooo 3.0 bugfix cws |
DEV300m31 |
greenstate30ver2_DEV300 |
[Automation] - showstopperfixes for the Greenstate of 3.0 |
DEV300m31 |
greenstate30ver3_DEV300 |
|
DEV300m31 |
hb10 |
Fixes/Patches for 3.1 |
DEV300m31 |
hotmac_DEV300 |
rtl_memory_fini gets called to early, before the d'tors of C++ objects .. |
DEV300m31 |
impress153_DEV300 |
Show stopper bug fixes for OOo 3.0 |
DEV300m31 |
impress154_DEV300 |
Show stopper bug fixes for OOo 3.0 |
DEV300m31 |
impress155_DEV300 |
Bug fixes for OOo 3.0 |
DEV300m31 |
jl110_DEV300 |
3.0 issues |
DEV300m31 |
kendy21 |
Support for MSVC 2005 Standard and MSVC 2008 Express in oowintool. Improved handling of Cygwin's PATH (in a pathological, but working, case). |
DEV300m31 |
localisation31_DEV300 |
Fixed broken hungarian translation , fixed several hc2 issue in various languages |
DEV300m31 |
macrestart_DEV300 |
Force soffice process to automatically restart after a crash occured. |
DEV300m31 |
mav37_DEV300 |
Showstopper cws for OOo3.0 |
DEV300m31 |
mav38_DEV300 |
Showstopper fix for the database documents opening problem. |
DEV300m31 |
mh30f_DEV300 |
last minutes todos |
DEV300m31 |
native184_DEV300 |
OO0 3.0 installation tasks |
DEV300m31 |
native185_DEV300 |
Enable installation with Java GUI Installer and user privileges again. |
DEV300m31 |
native186_DEV300 |
OOo 3.0 installation tasks |
DEV300m31 |
native188_DEV300 |
OOo 3.0 update tasks. |
DEV300m31 |
native189_DEV300 |
OOo
3.0 installation tasks. This issue is about the parallel installation
of StarOffice and StarSuite. |
DEV300m31 |
native190_DEV300 |
Additional Windows Patch preparations |
DEV300m31 |
native191_DEV300 |
OOo 3.0 installation tasks |
DEV300m31 |
native193_DEV300 |
OOo 3.0 installation tasks. |
DEV300m31 |
obo33 |
Keep build for 64 bit Vista shell extension alive |
DEV300m31 |
obo34 |
Fix for i93167 |
DEV300m31 |
oobeanfix_DEV300 |
|
DEV300m31 |
sb91 |
Solaris SPARC 64 bit port |
DEV300m31 |
sb95_DEV300 |
fix CWS macrestart |
DEV300m31 |
sw30bf13_DEV300 |
late fixes in Writer for OOo 3.0 |
DEV300m31 |
swenhancedfields2 |
Enhanced fields for better interoperability |
DEV300m31 |
sysui30_DEV300 |
Linux / Solaris system integration issues |
DEV300m31 |
tl61 |
OOo 3.0 fixes. |
DEV300m31 |
vcl30stop5_DEV300 |
fix issue 92674 |
DEV300m31 |
vcl93 |
GSL related stuff important enough for OOo3.0 |
DEV300m31 |
aw033 |
CWS for GraphicPrimitives |
DEV300m30 |
gh15 |
testtool bugs and features 2008 |
DEV300m30 |
xsltfilter10 |
Exchanging the binary JARS of Xerces/Xalan couple (xalan.jar/xercesImpl.jar/xml-apis.jar/serializer.jar) |
DEV300m30 |
maccrashrep |
Enable crash reporting for MacOSX builds |
DEV300m30 |
hrovista2 |
Critical OOo 3.0 fixes for Windows Vista and Windows XP |
DEV300m30 |
rmfreetype |
Remove the private copy of libfreetype.so.6 |
DEV300m30 |
dba31a |
Ongong bug fixing for OOo 3.1 |
DEV300m30 |
mh30b |
various issue towards 3.0 |
DEV300m30 |
doccomments01 |
Extend import and export notes (ala postits/comments) to .doc format to support formatting newly available in 3.0 |
DEV300m30 |
register30 |
Update the way of registering OOo |
DEV300m30 |
userdatamigration |
Migrate userdata |
DEV300m30 |
autotestfixfha1 |
|
DEV300m30 |
i18n44 |
i18n bug fixes |
DEV300m30 |
helpsearch |
hotfix for Japanese help index search i91750 |
DEV300m30 |
ocautotestfixes01 |
Autotestfixes for the spreadsheet module |
DEV300m30 |
dictionaryupdate |
update of some dictionaries to latest versions |
DEV300m30 |
os119 |
Fix of issue i91896 |
DEV300m30 |
vcl30stop1 |
gsl showstopper |
DEV300m30 |
sw30bf10 |
late fixes in Writer for OOo 3.0 |
DEV300m30 |
native177 |
Removing ICE check errors in msi database. |
DEV300m30 |
extrasooo30 |
unification CWS for SO/OOo extras |
DEV300m30 |
dr65 |
Latest OOo 3.0 fixes |
DEV300m30 |
pdf25 |
|
DEV300m30 |
vcl30stop2 |
last minute fixes for 3.0 |
DEV300m30 |
cmcfixes48 |
Uncontroversial fixes and improvements, generally in the vicinity of xmlsignature code |
DEV300m30 |
mhu19 |
sal/rtl/source/alloc_global.c is not 64bit clean. |
DEV300m30 |
tbo02 |
Fix typos in include files of testautomation/framework |
DEV300m30 |
native178 |
OOo 3.0 installation tasks |
DEV300m30 |
sw30bf11 |
fixes for OOo 3.0 in Writer |
DEV300m30 |
ab56 |
Split library container config files script.xlc, dialog.xlc |
DEV300m30 |
mav35 |
OOo3.0 showstopper cws. |
DEV300m30 |
aquaupdateicon |
Implement update icon in native menubar on Mac |
DEV300m30 |
impress151 |
impress showstopper fixes for OOo 3.0 |
DEV300m30 |
native179 |
OOo 3.0 installation tasks |
DEV300m30 |
dev300m30masterfix |
|
DEV300m30 |
languageswitchfix |
Prevent superfluous language changes caused by the system keyboard |
DEV300m30 |
vcl30stop3 |
Some more 3.0 showstoppers |
DEV300m30 |
native180 |
Preparing OOo 3 for Windows patches using msp technique. |
DEV300m30 |
pflin11 |
basic fix |
DEV300m30 |
tl58 |
|
DEV300m30 |
hsqldb1810 |
Integrate hsqldb version 1.8.0.10 |
DEV300m30 |
dba30h_DEV300 |
fix issue 92668 |
DEV300m30 |
cwscheckapi3_DEV300 |
bugfix for cwscheckapi: since on Linux tgz are default for cws cwscheckapi could not install the office nymore |
DEV300m30 |
sw30bf12_DEV300 |
Galician spell checker added and Ichitaro filters removed |
DEV300m30 |
localisation30_DEV300 |
L10N showstopers |
DEV300m30 |
vcl30stop4_DEV300 |
GSL related showstoppers for OOo 3.0 |
DEV300m30 |
native182_DEV300 |
OOo 3.0 / SO 9 installation tasks |
DEV300m30 |
impress152_DEV300 |
showstopper fixes for impress in OOo 3.0 |
DEV300m30 |
dev300m29masterfix |
|
DEV300m29 |
ause091 |
build cleaner - cleaner build |
DEV300m29 |
chart22 |
Plotting of missing values |
DEV300m29 |
doccustomproperties2 |
New document properties page: custom properties page replaces user defined page |
DEV300m29 |
impress150 |
Impress showstopper fixes for OOo 3.0 release |
DEV300m29 |
layoutdialogs |
* Enable compiling of layout engine by default. |
DEV300m29 |
pb20 |
Truncated strings issues |
DEV300m29 |
pba11y02 |
Fixes for A11y issues. |
DEV300m29 |
sb92 |
HelpLinker crash on Solaris |
DEV300m29 |
vcl91 |
3.0 showstoppers in gsl |
DEV300m29 |