Apache OpenOffice (AOO) Bugzilla – Issue 20434
No error when no printer installed
Last modified: 2013-02-07 22:19:57 UTC
(I'm not sure if this is the right component to report this) I tried to print a writer document directly from the Explorer (right click, select Print). I was unaware that I did not have printers installed (or better, that the Print Spooler service was down). The print operation failed silently. I tried to print a few times without luck before I began to suspect that something was wrong with the print subsystem. I was expecting an error or some kind of message from Open Office that the operation failed. I tried also without any printers but the spooler subsystem active but the result was the same, no error.
If there is no error warning, we can have problem when printing over network. we didnt know if the printing is OK, or got problem. in work it sometimes can be very important. change the component to gsl, as this is printing issue
cp->ssa: is it that we do not detect an error or just that there is no UI to show the error (or both) ?
utomo > SSA: Please check . thanks ------- Additional Comments From Christof Pintaske 2003-10-07 01:05 PDT ------- cp->ssa: is it that we do not detect an error or just that there is no UI to show the error (or both) ?
ssa->lo: As you are responsible for the cmdline parameters, may be you can find out if this behaviour is wanted. In general, dialogs are not supressed when printing via cmdline, but it seems that in this case (no printer installed) the corresponding error message is not triggered.
I have seen that the last entry was in February 2004 and that it is OOo-1.1RC5 related. Have you tried this with a newer version of OOo? And does your problem occur there also? If not: Could you (or someone else) close this issue, please?
thackert: I've tried this with 1.9.m62 and the behavior is the same. No error messages or other indications that the print will fail.
Confirmed in 1.9.77. When no printer is defined, OOo silently fails to print.
set target
dispatching to framework
dispatch to framework
cd: Accepted.